case ih

Part Number: SBI0847

Description:

The All-Crop concave set for the 1680-7088 series of Case IH combines includes the 6 concaves, which are half size as compared to OEM, bolt on front slope, and comes with 2 additional inserts. The setup produces the most optimal results for crop threshing and separating amongst a range of crops without having to change concaves. The set can, however, be customized for specific crops or conditions by changing out the individual inserts or concaves. Inserts are replaceable and reversible 180 degrees for economical refurbishment.

Part Number: SBI0842

Description:

Concave consists of main frame with 7 regular max thresh inserts. Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert.

Part Number: SBI0846

Description:

Concave assembly consists of main frame with 7 Rod Separator Inserts. The Rod Separator Insert is a very passive insert; its main function is to separate with as little damage as possible. It would be used in edible bean crops to reduce dockage due to splits or cracks. Surprisingly it has also helped in extremely dry canola conditions moving the crop residue with as little damage as possible This insert used for crops such as corn or sunflower. Individually replaceable .

Part Number: SBI0844

Description:

Concave assembly consists of concave frame with 7 Round Bar Inserts. The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing.

Part Number: SBI0843

Description:

Concave consists of main frame and 7 standard thresh inserts. The Standard Thresh insert provides threshing, but it is less aggressive than our helical bar style. Standard Thresh Insert is designed to balance threshing and separating and is typically used in the middle of a concave set to transition materials or where a less aggressive thresh is desired. Individually replaceable.

Part Number: SBI0842B

Description:

Concave consists of main frame and 7 boron max thresh inserts. Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the concave, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear.

Part Number: SBI0842CL

Description:

Concave consists of main frame and 7 clover boron max thresh inserts. The clover insert is our maximum threshing insert, and it is used in extremely hard thresh conditions. Used in crops like grass seeds, flax, durum and hard-to-thresh wheat varieties. This insert is typically installed into the front concaves in limited numbers or ordered as a full concave. These inserts are individually replaceable, 180-degree reversible and boronized to extend the life of the insert. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components to strengthen resistance to corrosion and abrasive wear.

Part Number: SBI0840

Description:

Empty box-style concave frame.

Part Number: SBI0842M1

Description:

Concave assembly consists of main frame with 1 Round Bar insert and 6 Regular Max Thresh Inserts. Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 reversible to extend the life of the insert.

Part Number: SBI0844M2

Description:

The concave assembly consists of main frame with 5 Round Bar Inserts and 2 Standard Thresh Inserts. Round bar inserts are designed for the separation of the crops with no threshing aspect. Inserts are reversible and replaceable.

Part Number: SBI0844M1

Description:

The concave assembly consists of concave frame with 6 Round Bar Inserts and 1 Standard Thresh Insert. The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing.

Part Number: SBI0843M2

Description:

Concave assembly consists of concave frame with 5 Standard Inserts and 2 Round Bar Inserts. The combination of the Standard Thresh Inserts and Round Bar Inserts is designed to balance threshing and separating and is typically used in the middle of a concave set or where a less aggressive thresh is desired. Individually replaceable.

Part Number: SBI0800

Description:

Front lip designed to create transition for material entering the concaves.

Part Number: SBI0840B

Description:

Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert.

Part Number: SBI0840D

Description:

The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing.

Part Number: SBI0840C

Description:

The Standard Thresh insert provides threshing, but it is less aggressive than our helical bar style. Standard Thresh Insert is designed to balance threshing and separating and is typically used in the middle of a concave set to transition materials or where a less aggressive thresh is desired. Individually replaceable.

Part Number: SBI0840F

Description:

The Rod Separator insert is a very passive insert; its main function is to separate with as little damage as possible. It would be used in edible bean crops to reduce dockage due to splits or cracks or with dry canola conditions moving the crop residue with as little damage as possible. This insert can be used for crops such as corn or sunflower. Individually replaceable and 180 degree reversible.

Part Number: SBI0780

Description:

The All-Crop concave set for the Flagship Series Case IH combines includes the 8 concaves, which are half size as compared to OEM, integrated front lip, and comes with 2 additional inserts. The setup produced the most optimal results for crop threshing and separating. The set can however, be customized for specific crops or conditions by changing out individual inserts.

Part Number: SBI0780L2

Description:

Concave consisting of concave left frame with 3 Max Thresh Inserts and 1 Round Bar Insert.

Part Number: SBI0780R3

Description:

Third row concave consisting of 2 round bar and 2 standard thresh inserts; balancing the threshing and separating capabilities.

Part Number: SBI0780L3

Description:

Regular Max Thresh concave consisting of left concave frame with 2 Standard Inserts and 2 Round Bar Inserts.

Part Number: SBI0780R4

Description:

Rear of concave with all round bar inserts to promote separation.

Part Number: SBI0760BB

Description:

The Boron Max thresh insert has narrower slots than the regular max thresh insert. It is typically positioned at the front of the concave, as it is designed for maximum threshing. It has small holes to allow early separation of already threshed grain, is 180-degree reversible, and is boronized for extended wearability. Boronizing is a thermo-chemical hardening process usedto improve the life and performance of metal components and strengthen resistance to corrosion and abrasive wear.

Part Number: SBI0762L

Description:

Concave consists of main frame and 4 regular max thresh inserts. Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert. Left hand configuration.

Part Number: SBI0762R

Description:

Concave consists of 4 regular max thresh inserts. Regular Max thresh insert is normally used in the front area of the concave. The angled helical bar provides for head-on threshing and has slightly larger holes than the Boronized Max Thresh Insert to encourage early separation. These inserts are individually replaceable and 180 degree reversible to extend the life of the insert. Right hand configuration.

Part Number: SBI0766L

Description:

Concave consists of main frame and 4 rod separator inserts. The Rod Separator insert is a very passive insert; its main function is to separate with as little damage as possible. It would be used in edible bean crops to reduce dockage due to splits or cracks or with dry canola conditions moving the crop residue with as little damage as possible. This insert can be used for crops such as corn or sunflower. Individually replaceable and 180 degree reversible. Left hand configuration

Part Number: SBI0766R

Description:

Concave consists of main frame and 4 rod separator inserts. The Rod Separator insert is a very passive insert; its main function is to separate with as little damage as possible. It would be used in edible bean crops to reduce dockage due to splits or cracks or with dry canola conditions moving the crop residue with as little damage as possible. This insert can be used for crops such as corn or sunflower. Individually replaceable and 180 degree reversible. Right hand configuration

Part Number: SBI0764L

Description:

Concave consists of main frame and 4 round bar inserts. The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing. Left hand configuration.

Part Number: SBI0764R

Description:

Concave consists of main frame and 4 round bar inserts. The Round bar insert is mainly a separating insert although it does offer a minimal amount of threshing action. More rows of this style would be used in a setup for corn or crops requiring minimal threshing. Right hand configuration.

Part Number: SBI0763L

Description:

Concave consists of main frame and 4 standard thresh inserts. The Standard Thresh insert provides threshing, but it is less aggressive than our helical bar style. Standard Thresh Insert is designed to balance threshing and separating and is typically used in the middle of a concave set to transition materials or where a less aggressive thresh is desired. Individually replaceable. Left hand configuration.